|
||||||
|
||||||
|
상품번호 : 63 | |
(1) | (2) |
---|
WIFI 통신이 가능한 무선통신 모듈입니다. 시리얼통신 방식이라 아두이노, AVR, PIC 등에연결하여 쉽게 사용 가능합니다.
모든 명령에는 공백(스페이스) 없이 다 붙여 써야 합니다.
Commands | Description | Type | Set/Execute | Parameters and Examples |
---|---|---|---|---|
AT | general test | basic | – | – |
AT+RST | restart the module | basic | – | – |
AT+GMR | check firmware version | basic | – | – |
AT+CIOBAUD | baud rate | basic | – | AT+CIOBAUD? AT+CIOBAUD=9600 AT+CIOBAUD=115200 |
AT+CWMODE | wifi mode | wifi | AT+CWMODE= | 1= Sta, 2= AP, 3=both, Sta is the default mode of router, AP is a normal mode for devices |
AT+CWJAP | join the AP | wifi | AT+ CWJAP = | ssid = ssid, pwd = wifi password |
AT+CWLAP | list the AP | wifi | AT+CWLAP | |
AT+CWQAP | quit the AP | wifi | AT+CWQAP | |
AT+ CWSAP | set the parameters of AP | wifi | AT+ CWSAP= | ssid, pwd, chl = channel, ecn = encryption; eg. Connect to your router: AT+CWJAP=”www.electrodragon.com”,”helloworld”; and check if connected: AT+CWJAP? |
AT+CWLIF | check join devices’ IP | wifi | AT+CWLIF | |
AT+ CIPSTATUS | get the connection status | TCP/IP | AT+ CIPSTATUS | |
AT+CIPSTART | set up TCP or UDP connection | TCP/IP | 1)single connection (+CIPMUX=0) AT+CIPSTART= | id = 0-4, type = TCP/UDP, addr = IP address, port= port; eg. Connect to another TCP server, set multiple connection first: AT+CIPMUX=1; connect: AT+CIPSTART=4,”TCP”,”X1.X2.X3.X4″,9999 |
AT+CIPMODE | set data transmission mode | TCP/IP | AT+CIPMODE= | 0 not data mode, 1 data mode; return “Link is builded” |
AT+CIPSEND | send data | TCP/IP | 1)single connection(+CIPMUX=0) AT+CIPSEND= | eg. send data: AT+CIPSEND=4,15 and then enter the data. |
AT+CIPCLOSE | close TCP or UDP connection | TCP/IP | AT+CIPCLOSE= | |
AT+CIFSR | Get IP address | TCP/IP | AT+CIFSR | |
AT+ CIPMUX | set mutiple connection | TCP/IP | AT+ CIPMUX= | 0 for single connection 1 for multiple connection |
AT+ CIPSERVER | set as server | TCP/IP | AT+ CIPSERVER= | mode 0 to close server mode, mode 1 to open; port = port; eg. turn on as a TCP server: AT+CIPSERVER=1,8888, check the self server IP address: AT+CIFSR=? |
AT+ CIPSTO | Set the server timeout | AT+CIPSTO= | AT+CIPSTO? | |
+IPD | received data | For Single Connection mode(CIPMUX=0): + IPD, For Multi Connection mode(CIPMUX=1): + IPD, |
번호 | 부품명 | 수량 | 기능 | 판매처 |
---|---|---|---|---|
1 | WAT-Arduino128 | 1 | 아두이노 | /goods/view.php?seq=64 |
2 | WIFI 모듈 | 1 | WIFI 통신 | /goods/view.php?seq=63 |
WAT-Arduino128 | WIFI 모듈 |
---|---|
아래와 WAT-Arduino128 모듈의 J26 에 연결합니다.
소스코드 및 최신 자료는 https://docs.whiteat.com/?p=651에서 확인하실 수 있습니다.
(1) | (2) |
---|
<<<<<<<<<<<<< 전체 상품 후기 보기 (클릭) >>>>>>>>>>>>>> |
(1) | (2) |
---|
|
|||||||||||
회사명 : 화이트앳
| 사업자등록번호 : 106-11-55283 [사업자정보확인]
| 주소 : 서울특별시 구로구 고척동 253-64 지층 101호 통신판매업 신고 : 2022-서울구로-1047 | 연락처 : 070-4412-5754 | FAX : 02-0000-0000 | 개인정보관리 책임자 : 한정욱 | 대표자 : 박원호 contact : help@kit128.com for more information |
|||||||||||